We can provide all of the hardware you need for a first time installation, or to add machines to an existing system. These are all industrial grade components that are proven to last.
The hardware list is as follows:
xlConnect-UE
- This unit connects directly from the ethernet network to the USB port on the machine tool, and is the only DNC system that can connect directly to a CNC machine that comes from the manufacturer with just a USB port
- Includes power adapter and USB cable
- Dimensions 3.625"W, 1.375"H, 6.125"L, and up to 5mbps speed (dependent on network)
eHub
- This unit is for CNCs with serial ports and a wired ethernet connection to your network
- 8 serial ports for CNCs, 1 ethernet port to connect to the network
- Includes power cable
- Dimensions 8"W, 1.5"H, 11”L
E-Terminal
- This unit will give you the ability to collect data at the CNC, and to easily be able to upload/download programs and enter monitoring events
- 1 serial port for CNC, 1 serial port for scanner, and 1 serial port to connect to the eHUB or xlConnect Unit
- Includes 7' CAT-5 cable and 12V power supply
- Dimensions 3.875"W, 1.125"H, 7.375”L
xL Connect-W Unit
- This unit is wireless and used on CNCs that have an ethernet port for communications, supports FTP and CAPS
- 1 ethernet port for CNC, 1 serial port for accessories
- Includes 7' CAT-5 cable and 12V power supply
- Wireless is 802.11 B or G
- Dimensions 3.625"W, 1.375"H, 6.125"L
xl Connect-E Unit
- This unit is for CNCs with a serial port and a wired connection to your network
- 1 serial port for CNC, 1 serial port for accessories, and 1 ethernet port to connect to network
- Includes 7' CAT-5 cable and 12V power supply
- Dimensions 3.625"W, 1.375"H, 6.125"L
xL Connect-2 Unit
- This unit is wireless and used on a CNC with a serial port (RS-232)
- 1 serial port for CNC, 1 serial port for accessories
- Includes 7' CAT-5 cable and 12V power supply
- Wireless is 802.11 B or G
- Dimensions 3.625"W, 1.375"H, 6.125"L
xL Connect-U Unit
- This unit is wireless and is used on CNCs with USB ports, it mimics a USB thumb drive
- 1 USB port for CNC, 1 serial port for accessories
- Includes 4' USB cable and 12V power supply
- Wireless is 802.11 B or G
- Dimensions 3.625"W, 1.375"H, 6.125"L
Machine Monitoring Board
- This unit is for collecting signals from machines such as Cycle On, Feed Hold, Spindle on/off, Feed Rate Override, Spindle Override, etc
- 1 serial port for connection to eHUB or xlConnect, 1 serial port for CNC (optional)
- DB25 Connector, connects to – 8 digital outputs, 2 analog outputs, 1 digital input. Multiple boards can be connected to a machine
- Dimensions 3.375"W, .625"H, 4.5"L
CCD Hand Held Scanner
- This unit is for scanning data in at the CNC for eNETDNC to use for DNC, Data Collection or Monitoring
- 1 serial connection for eTerminal
- Includes 7' Cable
- Dimensions 3.625"W, 1.5"H, 7.375"L